MaxxECU Race

Extremely versatile engine control system for powerful engines with up to 8 sequential cylinders. Up to 12 in wasted spark. Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar/43.5psi of boost. Get into serious tuning with advanced functions such as built-in E-throttle, 8 EGT, knock sensor inputs and superfast Cortex M3 CPU

Target engines of MaxxECU Race

• All 1-12 cylinder engines (2/4 stroke)
• Up to 8 cylinders fully sequentially
• up to 12 cylinders

MaxxECU Race inputs

• Intake air temperature sensor
• Coolant temperature sensor
• Throttle position sensor
• Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
• 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against the interference 
• 2 extra temperature sensors. Can be used as switches or control of additional functions
• 2 knock sensor inputs
• 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
• 4 extra digital inputs used for example speed sensors (VR/Hall) or switches
• 8 EGT TYPE-K/N inputs (1200C/2200F) in separate harness

MaxxECU Race outputs

• 8 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
• 8 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
• 9 extra LOW DRIVING outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8, 10 (2A), GPO 9 (5A)
• 2 extra +12V DRIVING outputs (GPO 15,16) (2A)
• 4 extra motor outputs (ex E-Throttle). GPO 11-14 (2A) 

Kit Options

Basic — ECU, 2x Plug and pins, Vacuum hose adaptor, USB cable, Bluetooth Aerial, ECU Pinout sheet.

Standard — ECU, 1x 3m loom with additional cable, Push lock hose and fittings, USB cable, Bluetooth Aerial, ECU Pinout sheet.

Premium — ECU, 2x 3m loom with additional cable, Push lock hose and fittings, LSU 4.2 and connector, USB cable, Bluetooth Aerial, ECU Pinout sheet.